Thanks:
0
Likes:
0
Dislikes:
0
-
color 8031
client is having issue with color.
one side of the color is coming out in magenta red "band"
I figure it might be image drum unit or possible that color image sensors needs to be clean..
have call back tomorrow..
any ideas... i don't touch konica too offen..
thx
-
Could be anything. upload a sample
-
Village Idiot
500+ Posts
- Rep Power
- 42
Have you cleaned all of the LED arrays? Sometimes you may need to use a slightly damp cloth and then immediately dry them with another cloth. Try that, see what happens!
-
I had something similar but i also had a green band on opposite side. red band was at back and green at front, running in feed direction. i replaced the black LED! the LED's are known to cause weird problems on these machines, especially on image.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks