Thanks:
0
Likes:
0
Dislikes:
0
-
Bizhub 250 C3451
Okay, client ran some thick stock, then machine went into a C3451 code, won't reset. Tried button by CF Card and all. Is complete fuser shot or what?
Thanks
Kelly
-
Re: Bizhub 250 C3451
if u dont have a fuser on another machine to swap, check for continuity on the thermostat in the fuser. U must disconnect the wires from the t-stat, or u wont get a good read. U can do the same for the lamps and find out.
-
Trusted Tech
50+ Posts
- Rep Power
- 0
Re: Bizhub 250 C3451
Just had that problem, thermostat was bad, just exchanged from old fuser and now works fine
TH3 paper went all over the roller and make damage, in mu case
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks