I have already replaced the developer K , done the toner density sensor initial auto adjust ( no error ) , but when I switch the machine on in normal mode, gives error 2804
Please help
I have already replaced the developer K , done the toner density sensor initial auto adjust ( no error ) , but when I switch the machine on in normal mode, gives error 2804
Please help
Have you cleaned and checked the Gama sensor ?
Where is the Gama sensor located?
Call a qualified tech , you can really screw up this machine if you dont know what you are doing.
try clean the PGC sensor.
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
I solved this problem by changing the developer unit complete
This guy got lucky fixing a 2804 code by just replacing the dev unit. Problem WAS NOT the dev unit. Machine had adjusted itself out of its ability to get back.
Yes indeed you can really put one of these totally out of commission if you do not know what you are doing here.
Problem can be in charge system, drum potential sensor failure, toner system including addition of toner, developer unit, color registration sensor failure and maybe a printer board or Image Processing board. All of these have to tested and confirmed as working for a sure fix.
Bookmarks