Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Technician
    Join Date
    Oct 2011
    Location
    new village
    Posts
    36
    Rep Power
    26

    BH250 Change NVram

    I change a nvram and the mfbs board today. everything was fine, until i place a4 paper on the glass and the machine tell there is no matching paper in the trays. both trays loads with a4 and a4r paper. flash it back, nothing happen. someone, please tell me what should i do?

  2. #2
    Major Asshole! 2,500+ Posts
    BH250 Change NVram

    mrwho's Avatar
    Join Date
    Apr 2009
    Location
    Combing the desert!
    Posts
    4,293
    Rep Power
    86

    Re: BH250 Change NVram

    What size of paper does the machine detect on the tray?
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

  3. #3
    Senior Tech 250+ Posts
    BH250 Change NVram


    Join Date
    May 2011
    Location
    UK
    Posts
    299
    Rep Power
    30

    Re: BH250 Change NVram

    I had a similar problem on a Di2510 which works in the same way try doing the following

    1. Select the functions as follows: Tech. Rep. Mode → [System Input] → [Original Size
    Detecting Option]. Then, change the setting for Original Size Detecting Option from
    [No] to [Yes].
    2. Select the Tech. Rep. Mode → [Function] → [F7-1].
    3. Stack five sheets of blank A3 paper on the Original Glass.
    4. Press the Start key to perform automatic adjustment by the Original Size Detecting
    Sensor
    5. Turn OFF the Main Power Switch, wait for 10 sec., then turn the switch ON.

  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,054
    Rep Power
    43

    Re: BH250 Change NVram

    new or different board, You may want to check area and measurement settings.

  5. #5
    Field Supervisor 1,000+ Posts
    BH250 Change NVram

    TheOwl's Avatar
    Join Date
    Nov 2008
    Posts
    1,734
    Rep Power
    62

    Re: BH250 Change NVram

    Also check your Marketing Area in Tech Rep Mode.
    Please don't ask me for firmware or service manuals as refusal often offends.

  6. #6
    Technician
    Join Date
    Oct 2011
    Location
    new village
    Posts
    36
    Rep Power
    26

    Re: BH250 Change NVram

    Quote Originally Posted by mrwho View Post
    What size of paper does the machine detect on the tray?
    if im not mistaken, it detect a3 paper.

    Quote Originally Posted by Gaffers01 View Post
    I had a similar problem on a Di2510 which works in the same way try doing the following

    1. Select the functions as follows: Tech. Rep. Mode → [System Input] → [Original Size
    Detecting Option]. Then, change the setting for Original Size Detecting Option from
    [No] to [Yes].
    2. Select the Tech. Rep. Mode → [Function] → [F7-1].
    3. Stack five sheets of blank A3 paper on the Original Glass.
    4. Press the Start key to perform automatic adjustment by the Original Size Detecting
    Sensor
    5. Turn OFF the Main Power Switch, wait for 10 sec., then turn the switch ON.
    nice input, will try it. thanks! will update when i revisit the machine. from now on, user need to set manually which paper they want to use. but normally they use the radf.

    Quote Originally Posted by mo0651 View Post
    new or different board, You may want to check area and measurement settings.
    new board. mm and others.

    Quote Originally Posted by TheOwl View Post
    Also check your Marketing Area in Tech Rep Mode.
    set to others.

    guys,
    thanks for the info. will try it all. maybe i made mistake somewhere. will update to you all. thanks again!

  7. #7
    Technician
    Join Date
    Oct 2011
    Location
    new village
    Posts
    36
    Rep Power
    26

    Re: BH250 Change NVram

    dear gaffers01,
    thanks a lot for the tips.. it works!
    problem solved!

    wonder how you know the tricks. is it written in the service manual?

  8. #8
    Senior Tech 250+ Posts
    BH250 Change NVram


    Join Date
    May 2011
    Location
    UK
    Posts
    299
    Rep Power
    30

    Re: BH250 Change NVram

    Yes it is in the manual, but it took me ages to find it when i had the problem originally.

    Glad i could help.



    Quote Originally Posted by k130 View Post
    dear gaffers01,
    thanks a lot for the tips.. it works!
    problem solved!

    wonder how you know the tricks. is it written in the service manual?

  9. #9
    Technician
    Join Date
    Oct 2011
    Location
    new village
    Posts
    36
    Rep Power
    26

    Re: BH250 Change NVram

    erm.. i still cant find any clue about it in the manual. what else should i say except millions thanks. 3 months ago, i change 1 nvram but the no need to adjust f7-1. probably this is the new board (got jumper to change from 300 to 400mhz), and it need to set like you told. again, thanks!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here