Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Junior Member
    Join Date
    Nov 2011
    Rep Power

    Re: Problem with Fiery 50c-k Bizhub pro c500

    Quote Originally Posted by Marcohey View Post
    Yes, it is an IP921v 1.1 Make sense trying installing that pacht. where I can get it?


    I installed the patch, not changes. Now black is gone !! no more printing black from fiery. configuration page is blank, black do appear in copies and printing reports from key operator black text show ok.

    PS test page shows black does not come out too. machine have 245,000 copies 25,400 from last maintenance.

    Attached Files Attached Files

  2. #12
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    San Bernardino
    Rep Power

    Re: Problem with Fiery 50c-k Bizhub pro c500

    I haven't read the whole tread but under calibration you can choose to remove previous calibration. Or you can tell the fiery to do a full reset (that should fix it) but then you'll have to put all the ip info back into it. And the such.

    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts