Tech needed for BizHub Pro 1050EP

[scotsman60]

Faultman and blado,


Got back to the shop this weekend and stripped down the trasnport drives inside the paper feeder and you called it exactly right.

The inside of the gear (Item 15) was completely destroyed so the drive pin was spinning but no drive was getting to the inner side of the coupling!!!

I ordered a new gear and should have the system up and running on all drawers next week.

Thanx for the help!!!!


Doug

think i had this once before when the pin had broken away the inside of the plastic gear (think it was item 19 or 15). This causes loss of drive to the feed, the gear just spins because the moulding for the pin to locate into is broken. Hope this helps!!!

[scotsman60]

This is exctly the gear that was stripped!!!!


Thanx again.



QUOTE=why1265;260781]check the pulley 26T inside the PF drive unit Attachment 13128[/QUOTE]