12.4.20 Manual Bypass Tray AdjustmentA. Use
• To set the maximum width and the minimum width for the bypass paper width detectionresistor of the manual bypass guide.• Use when the bypass paper width detection resistor of the manual bypass guide hasbeen changed.• Use when a false paper size is displayed when the manual bypass is used.
B. Procedure
1.
Call the Service Mode to the screen.
2.
Touch these keys in this order: [Machine] → [Manual Bypass Tray Adjustment].
3.
Touch [Max. Width].
4.
Load the bypass tray with paper having a width of 297 mm.
5.
Press the Start key and check that the results are [OK].
6.
Touch [Min. Width.].
7.
Load the bypass tray with paper having a width of 100 mm.
8.
Press the Start key and check that the results are [OK].
✽ Make the adjustment again if the results are [NG].
Bookmarks