Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: c6501

  1. #1
    Technician
    Join Date
    Apr 2011
    Posts
    43
    Rep Power
    27

    c6501

    Got a machine that will not print any cyan. I've checked the drums, corona, etc and found no problem. Swapped drums and corona around. Even swapped cyan's developer housing with magenta's. Still nothing would come out from that developer housing slot. Could it be something with the imaging for that color?

  2. #2
    Field Supervisor 500+ Posts
    c6501

    ni311's Avatar
    Join Date
    May 2008
    Posts
    658
    Rep Power
    39

    Re: c6501

    1. Try to print test pages from Service mode with cyan.
    2. Check the connection between machine and controller.
    3. try to print internal pages from the controller.
    4. swap the print head unit with any other color except black.

  3. #3
    Technician
    Join Date
    Jan 2010
    Posts
    11
    Rep Power
    29

    Re: c6501

    It's been a while now I have not worked on that but check the drive for cyan dev. Is it through a clutch ??

  4. #4
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,951
    Rep Power
    56

    Re: c6501

    Quote Originally Posted by brij View Post
    It's been a while now I have not worked on that but check the drive for cyan dev. Is it through a clutch ??
    I believe its direct drive. I've seen the gears get stripped out on the dev units. So that probably what is is, but it "should" throw a 45-20 if that was the case.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

  5. #5
    Field Supervisor 500+ Posts
    c6501

    ni311's Avatar
    Join Date
    May 2008
    Posts
    658
    Rep Power
    39

    Re: c6501

    Most probably it is a bad connection between controller and machine. In other case, you should get a lot of error codes.

  6. #6
    Technician
    Join Date
    Apr 2011
    Posts
    43
    Rep Power
    27

    Re: c6501

    Been busy, sorry for so long to reply, but it turned out the one for the cyan roller inside the transfer was cracked. This caused the roller to not make contact with the inside of the transfer belt thus no color. Would have thought it would have thrown a code when it could not do color registration.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here