Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member sim22's Avatar
    Join Date
    Aug 2011
    Location
    durham
    Posts
    8
    Rep Power
    0

    develop ineo+5501 - now adjusting

    fault started on friday, traced to cyan dev unit replaced unit + developer, setup ok . Fault returned today all units setup up ok, test patterns run from service mode but unable to get machine out of " now adjusting " have found that no yellow band is being generated on the transfer belt during initialization but all other colours are present. No errors are displayed only constant " now adjusting ".

    Any suggestions ?

  2. #2
    Technician
    Join Date
    Jun 2011
    Location
    Jakarta
    Posts
    47
    Rep Power
    26

    Re: develop ineo+5501 - now adjusting

    [ No errors are displayed only constant " now adjusting " ] --> try cleaning the humidity sensor machine.

  3. #3
    Junior Member sim22's Avatar
    Join Date
    Aug 2011
    Location
    durham
    Posts
    8
    Rep Power
    0

    Re: develop ineo+5501 - now adjusting

    fixed, turned out the yellow laser was dying ( no error codes though ) laser replaced machine works fine.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here