Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 26
Konica Minolta Bizhub Pro 920
Have a konica minolta bizhub pro 920 that gets an intermittent Z fold at the registration roller or no registration roller drive at all. M2 registration roller or relay roller. Need to know if anyone has ran into this before? Is this a usual problem with this machine?
-
Re: Konica Minolta Bizhub Pro 920
What is the jam code? how many copies on it? Z folds are usually caused by faulty clutches, but there are other factors. A little more info will help you get to the bottom of the problem faster.
-
Re: Konica Minolta Bizhub Pro 920
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
-
Technician
- Rep Power
- 26
Re: Konica Minolta Bizhub Pro 920
The machine has about 900K and the problem is intermittent. Sometimes it will Z fold but go through to finisher without jamming,it might Z fold up like an accordion and stop or it may run 20 or 30 without any problems.
-
Re: Konica Minolta Bizhub Pro 920
Jamming at registration or at finisher????? Go look at jam codes and get back to us.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks