Sorry pepper but you're wrong. If you would take a look at the bin file, you'll see that every new unit has the same data. I'm talking about the CF series and C350/351/450 only. I'm not sure about C300/352, I don't have the dumps.
Sorry pepper but you're wrong. If you would take a look at the bin file, you'll see that every new unit has the same data. I'm talking about the CF series and C350/351/450 only. I'm not sure about C300/352, I don't have the dumps.
Hi Neil
Hope you are well , If you need any info on the C250/252 300/352 series resetters let me know and I will be more than happy to help.
Regards
Bizhub
Chip-Life IU Resetter and Technical Site provided by Bravenet.com
ni311
Like I said I am not sure about those units, but I am certain about the C300/C352/C250/C252 if you check the management list the IU serial numbers are listed if they are not on the chip where is the machine getting the numbers from? That is one of the reasons the manufacturer requires a copy of the management list when ever a warranty claim is made on an IU.
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI Boxes
ni311
I don't claim to be an eprom expert but I do know the IU Lot# or serial # depending on model is also on the chip. I rechipped a C350 today and I printed a report before and after rechipping if you take a look you will see the IU Lot# for the black IU changes after being rechipped. I know if you compare dump files they look the same, but you don't actually get to see every bit segment on the chip perhaps a good hex editor compare program would show you where the lot number is different.
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI Boxes
Pepper, I don't want to argue with you but I can tell for sure that on the CF series and C350/351/450, the units are working with their chip resetted until they are running out of developer or the drum get scratched. I'm using for years and I never got one error because of the chip.
So, if the unit is rechipped only once, won't be the same s/n on it? Do you believe that the copier is checking the serial and if it was used already but only once it's ok, but if it was seen twice or more, the problems appear?!
Anyway, I believe the problem is the difference between CF2002 and 8020.
Are you getting any P warning codes?
For C250 and c 550
Ok I buy the chip reseter then I reset the tonner chip and refill them; then the the image units .
But I want to find the folowing:
where I can buy tonner for refil an drums(or a rebuild kit) for image units because a image unit can last for ever!
Tanks:
First, are you using a resetter now or are you intend to buy one?
Second, I believe you need the developer and not the toner to refill the imaging units. Unfortunately the IU won't last forever, at some point the drum will be damaged but it will last much longer if you reset it compared with the estimated period of life give by KM.
You guys are making this a lot more complicated then it has to be. Who cares what is going on inside the chip? If you use the programmer as instructed, when the chips are put into the IU and the IU into the machine it works! Thats the end of the story.
Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
Now into Ip TV KODI Boxes
Bookmarks