Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
Re: bizhub c253 error c4151 ie rotation problem on cyan laser
[QUOTE=malthus;270521]cheers mate u were right icp1 was blown on both boards . managed to replace icp1 ,which by the way also includes the black which i suspect is prime suspect for the fault as cyan is 1st to fire ,icp2 controls the yellow and magenta ,muchthe same as toner agitating moters.inow have a list for icp for allkm machines thanks for your help[/QUOTE
i know about the prcb board that have icp's but where is the other board that you change the icp
and why dont you use the terminology of a fuse Instead of icp.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks