Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Oct 2008
    Location
    Skopje
    Posts
    7
    Rep Power
    0

    Fuser trouble c-3102

    On bizhub press c6000 , the machine has 500k
    After startup there is clicking noise from the fuser unit and trouble c-3102 appears,
    few days ago the customer had a problem whit the pressure of the fixing unit and toner was coming off the paper, but after a little brake all was back to normal.
    I know that this problem appears constantly on c6500 series and its usually fixed whit replacement of the one way gears and shaft.
    Is it the same whit bizhub c6000? Or is there another cause of this problem?
    Last edited by kalimero; 06-26-2012 at 08:16 PM.

  2. #2
    Field Supervisor 500+ Posts ni311's Avatar
    Join Date
    May 2008
    Posts
    606
    Rep Power
    17

    Re: Fuser trouble c-3102

    call a tech...
    Drum, Transfer Belt and Fusing Unit Firmware Reset - http://www.bizhubreset.com
    Drum and Toner Chip Reset - http://www.chipreset.eu
    Transfer Belt and Fusing Unit Reset Kit - http://www.resetkit.eu

  3. #3
    Field Supervisor 5,000+ Posts JustManuals.com's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    8,348
    Rep Power
    106

    Exclamation Re: Fuser trouble c-3102

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com
    When you need a manual and you need it NOW !

    http://www.justmanuals.com
    Instant downloads

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •