Konica Minolta DI3510

[CCS@yahoo]

customer has DI3510, stays in warm up screen ( illustrations of 4 or 5 copiers ). attempted reboot, trouble reset; occasionally system goes to ready and becomes operational - 10% operational, 90% inoperational. Eventualy goes back to 'initial start up' screen and freezes up. Used as their printer - possible computer system issue ? Could use some help with this one

[solis557]

I would remove the network cable from the device and see if the machine goes to the ready state. I had one where the nic went bad and would make the machine reboot, but once i disconnected the network cable it would copy fine.

[BR549]

Try disconnecting HDD. I had the same problem and that is what it was.

[JustManuals]

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[RRodgers]

Check power as well, also might need a flash.

[ck1]

try remove the NC4 scan unit card and see. if still error rewrite firmware .