Please help me to reset to factory default the network interface, thanks
Please help me to reset to factory default the network interface, thanks
You shouldn't need to Factory reset the machine.
Just change the IP address and so on from the administrator mode.
Please don't ask me for firmware or service manuals as refusal often offends.
Printer does not print. When I send a print job, the light DATA is not flashing , but ping is correct
is the DHCP on or off? how many computers are connected? try to disconnect the machine then ping again, if there is still a reply, there is a conflict with one of your computer.
What port are you using to print to the machine with? RAW, LPR or any other?
Do you have Account Track or User Authentication enabled?
Please don't ask me for firmware or service manuals as refusal often offends.
If everything else fails, the machine will need to be serviced with the NVRAM reset tool to reset the NIC.
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
for 4
I printed directly from a laptop to check - the copier does not print
you can try clean the system error or change to LPR Print
Thanks for help )))
Bookmarks