Bizhub C252

[pinspin]

Please help me to reset to factory default the network interface, thanks

[TheOwl]

You shouldn't need to Factory reset the machine.

Just change the IP address and so on from the administrator mode.

[pinspin]

Printer does not print. When I send a print job, the light DATA is not flashing , but ping is correct

[goldencup]

is the DHCP on or off? how many computers are connected? try to disconnect the machine then ping again, if there is still a reply, there is a conflict with one of your computer.

[TheOwl]

What port are you using to print to the machine with? RAW, LPR or any other?

Do you have Account Track or User Authentication enabled?

[mrwho]

If everything else fails, the machine will need to be serviced with the NVRAM reset tool to reset the NIC.

[pinspin]

for 4
I printed directly from a laptop to check - the copier does not print

[pinspin]

What port are you using to print to the machine with? RAW, LPR or any other?

Do you have Account Track or User Authentication enabled?

- account track - disable
- user authentication - disable
- port 9100 , RAW

[ck1]

you can try clean the system error or change to LPR Print

[pinspin]

Thanks for help )))