I just got locked out of my administrator function and am not able to adjust my settings. How can I release the lock on the admin function and revert to default?
I just got locked out of my administrator function and am not able to adjust my settings. How can I release the lock on the admin function and revert to default?
Hi, Mitchl.
I understand completely. However there are no copier technicians for Konica Minolta machines in Liberia where we are.
We have a Konica Minolta Bizhub C450 whose administrator authentication was locked before we knew it. It was set on the default password (12345678) but it fails each time. Apparently, according to some certification report I found on the web, that it locks after three failed attempts. That's why we need to reset it. How do I even get to the service screen?
"details"
then
"stop,0,0,stop,0,1"
you'll get it
To reset the admin password:12345678 or it can be changed to a unique password.
1. Enter Service mode by pressing the Utility key then the Details button followed by pressing stop 0, 0, stop 0, 1.
2. Press stop, 0 then Clear to access the admin security mode. This will allow changing the admin password back to the default setting of
when i am trying the steps above after the 1st all i am getting is a screen where i need to enter password and nothing else.. step 2 i does nothing for me.. is maybe another softwere version ? please help..
It sounds like the advanced security might be turned on try using 92729272 which is the default CE password.
chang stop 00 stop 0 C > and disable CE pass you can go in service mode don't need password
Bookmarks