Results 1 to 5 of 5
  1. #1
    Technician mr.propper's Avatar
    Join Date
    Sep 2009
    Location
    Berlin
    Posts
    16
    Post Thanks / Like
    Rep Power
    11

    The CS6500 does not turn on.

    Hi all,

    The C6500 does not turn on.
    the display is black and the green power safe LED Status is on.
    This error is not in the Service manual described.

    i have
    replaced, without success:

    Image processing board (IPB)I/F board (IFB)Image memory control board (IMCB)Program of overall control board (OACB)
    Printer control board (PRCB)

    do you have another idea?


    Last edited by mr.propper; 07-27-2012 at 04:38 PM.

  2. #2
    Vulcan Inventor of Death 1,000+ Posts Mr Spock's Avatar
    Join Date
    Aug 2006
    Location
    tampa,fl
    Posts
    1,919
    Post Thanks / Like
    Rep Power
    43

    Re: The CS6500 does not turn on.

    After replacing oacb did you flash the firmware. A virgin board from KM does not come with firmware and needs to be loaded via iswtrns program. The machine "boots" straight to this mode and only needs you to run the upload from your pc via usb.

    And Star Trek was just a tv show...yeah right!

  3. #3
    Technician mr.propper's Avatar
    Join Date
    Sep 2009
    Location
    Berlin
    Posts
    16
    Post Thanks / Like
    Rep Power
    11

    Re: The CS6500 does not turn on.

    Hi Mr.Spock,

    yes i have.
    After change oacb the power safe LED flashes red.
    I have install I1 - I5 of this with ISW-trans successful.


  4. #4
    Field Supervisor 500+ Posts knightfall's Avatar
    Join Date
    Jul 2006
    Location
    State of Unconsciousness
    Posts
    598
    Post Thanks / Like
    Rep Power
    23

    Re: The CS6500 does not turn on.

    may want to look into this bulletin which description is a dead op panel caused by a short, bulletin 6085.

    good luck,

    Attached Files Attached Files
    Get your facts first, and then you can distort them as much as you please.

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Dec 2007
    Posts
    176
    Post Thanks / Like
    Rep Power
    16

    Re: The CS6500 does not turn on.

    DC Power Supply 1/2


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •