Hello, and thank you for letting me post. I have a Bizhub c250 that dates from 2005. A couple of days ago, the display flashed multiple times when I pressed the low power button, and the machine restarted in Japanese. I reset the language and then got a Cd-270 error, which I reset with at date clear. Now, I get a C-D36E error. I can clear it with the S07139* sequence. When I restart the machine, everything is hunky dory for a while. As long as I'm printing, I get no errors. If the machine sits for a while, like 10 min, the C-D36E error comes back. I can reset it again, and again, and again.... same thing. Sometimes, there is more than one error so the key sequence needs to be repeated, but this does not happen very ofter.I have read the posts, and know it's a NvRam error, but why does it go away and then come back? Is there a way to determine what is causing the error to recur? Thanks for your help, and if it needs a firmware upgrade to Phase 3.01 as Bulletin 5783 indicates, has anybody done this successfully? The bulletin is found at: Boletin NVRAM No 5783Thanks.
Bookmarks