Results 1 to 8 of 8
  1. #1
    Service Manager 250+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    371
    Post Thanks / Like
    Rep Power
    12

    Konica bizhub c-252 c-5102/3 code

    Hello,
    My c252 is getting a c-5102 and in the service it gives me a c-5102/3, I'm not sure what that means! a 5102 I believe is a main motor issue, I know there are several motors is in that area. Is that the motor that drives the transfer assembly and black drum unit ? I trouble reset the code and sometimes I can get the machine to come to ready and run a few copies then it will error out. I also turned the black drum it seem to be fine but I did not turn the developer roller, I dont think that matters and I turned the main motor by hand there does not seem to be any binding and I can see the transfer assembly rotate. I also removed the transfer assembly and turned it by hand, not binding. When I do a trouble reset and reboot the motor just sits there then the machine errors. thanks

    Last edited by acsolutions; 09-07-2012 at 02:20 AM.

  2. #2
    Junior Member
    Join Date
    Apr 2012
    Location
    Heilbronn
    Posts
    6
    Post Thanks / Like
    Rep Power
    0

    Re: Konica bizhub c-252 c-5102/3 code

    Good morning!
    There are 3 Motors in the Bizhubc252(M1-M3) M1 and M3 are same!
    exchange, nevertheless, the both! and you see whether your mistake walks.
    If so then the motor is defective.
    If not the PWB is defective!
    Good Luck!


  3. #3
    Field Supervisor 500+ Posts


    minimerlin's Avatar
    Join Date
    Nov 2007
    Location
    Scottish Highlands
    Posts
    764
    Post Thanks / Like
    Rep Power
    23

    Re: Konica bizhub c-252 c-5102/3 code

    Quote Originally Posted by acsolutions View Post
    Hello,
    My c252 is getting a c-5102 and in the service it gives me a c-5102/3, I'm not sure what that means! a 5102 I believe is a main motor issue, I know there are several motors is in that area. Is that the motor that drives the transfer assembly and black drum unit ? I trouble reset the code and sometimes I can get the machine to come to ready and run a few copies then it will error out. I also turned the black drum it seem to be fine but I did not turn the developer roller, I dont think that matters and I turned the main motor by hand there does not seem to be any binding and I can see the transfer assembly rotate. I also removed the transfer assembly and turned it by hand, not binding. When I do a trouble reset and reboot the motor just sits there then the machine errors. thanks
    Commen problem with this box, replace the main drive motor..the one on the left looking into the back of the machine!


  4. #4
    Field Supervisor 5,000+ Posts


    JustManuals.com's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,478
    Post Thanks / Like
    Rep Power
    133

    Lightbulb Re: Konica bizhub c-252 c-5102/3 code

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com


    When you need a manual and you need it NOW !

    http://www.justmanuals.com
    Instant downloads

  5. #5
    Service Manager 250+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    371
    Post Thanks / Like
    Rep Power
    12

    Re: Konica bizhub c-252 c-5102/3 code

    Quote Originally Posted by minimerlin View Post
    Commen problem with this box, replace the main drive motor..the one on the left looking into the back of the machine!
    Thanks for the response, I just want to know what that /3 is after the 5102, and what board drives it!


  6. #6
    Vulcan Inventor of Death 1,000+ Posts Mr Spock's Avatar
    Join Date
    Aug 2006
    Location
    tampa,fl
    Posts
    1,908
    Post Thanks / Like
    Rep Power
    42

    Re: Konica bizhub c-252 c-5102/3 code

    whenever KM uses a slash with a code 5102/3 that means the code can either be 5102 or 5103 for the troubleshooting info.

    And Star Trek was just a tv show...yeah right!

  7. #7
    Senior Tech 100+ Posts PeterG's Avatar
    Join Date
    Jul 2008
    Location
    Victoria
    Posts
    155
    Post Thanks / Like
    Rep Power
    14

    Re: Konica bizhub c-252 c-5102/3 code

    I believe I can change a C-250/252 main motor with my eyes closed now. Very common problem.
    Now takes me about 40 minutes from "walk in" to "walk out'.


  8. #8
    Service Manager 250+ Posts
    Join Date
    Jun 2010
    Location
    folsom
    Posts
    371
    Post Thanks / Like
    Rep Power
    12

    Re: Konica bizhub c-252 c-5102/3 code

    Ribbon cable!


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •