I need the firmware for Fiery X3e for CF1501. Could someone send it to me?
Thanks
I need the firmware for Fiery X3e for CF1501. Could someone send it to me?
Thanks
Yet another first poster wanting a handout.
Hi. All does Anyone have Fiery X3e system software for Pro C500?
My email is aziikcaleb@gmail.com. please help me.
Thanks
Hello,
I would apreciate if someone can help. We have the new Knoica Minolta bizhub C654/C754 attached to a Fiery Controller model: Fiery E100 60-55C-KM PS1.0
I need to reimage (reinstall the fiery software) on the controller but Konica is not being helpful at all and the maintainer have no idea how to do this. Can anyone please help me on how do i go about resintalling the software. I'll need manuals and software. My email address: jkerai@gmail.com
Many thanks,
Jay
Let me google that for you
Did I ever mention how I love this tool?
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
1st post and need need need...........
Hi friends.
hello friends.
I need your help, is urgent.
I have a Konica Minolta 7832 and I have the pass for access
the machine, as I suppose it will be impossible to get the keys to enter
in Command WorkStation, systema need the software (I think it is the fiery x3e), to charge, but not as loaded into the machine. I hope you can help me.
My email is: imprenta_breogan@hotmail.com
Thanks to all
Uh oh....
I have a KM - C351 and the Fiery Controller will not boot. It gets to....
LILO 22.2 Loading linux-ext2.........
Uncompressing Linux OK, booting the Kernel.....
That's as far as it gets.
I'm assuming I need to re-install the software but don't have any disks etc.
Does anybody have a copy they can let me have?
Many thanks.....
Darv
Hello,
i'm french excuse my english.
I have a konica minolta 7915 cf1501 fiery x3e with "no boot device".
I have a good level in computer science and must have an IDE 2.5 HDD to replace if necessary.
I do not contribute and ask I am sorry.
I would not like to throw this copier for a dead firmware or hdd it's been months since I try to find a solution you are my last chance!
Can you help me ?
Thank you.
I'm pretty sure I ha e boot.efi and system.efi which are the files needed to reload that fiery.
Only thing is you need a lpt to scsi cable to do it.
If you don't have one or a laptop with a printer port (not usb) your situation is at a standstill.
Back in the day I did almost 1 a week for failed fiery software.
He'll I may even have an old 3102 fiery in my basement. I'll look when I get home but I think I tossed the cable needed to do the install.
It's funny this came up, I found a new fuser for a 1501/2001 in my basement just this morning!!
Good luck finding the script cable, let me know.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Bookmarks