Hi there Folks,
I have a simple copy counter with reset/lock switches and counter inputs/displays for both B&W and Color (so the copyshop owner can easily see if the customer uses B&W/color or mixed). I checked the service manual and it seems that the Key Counter Connector does only provide a total count signal, not differing between B&W/col.
So the question:
Is there either a workaround or some kind of interface board/kit available?
I'm not much familiar with KM, only installed key counter at some Ricoh's so far without any issues. Usually I just pick the mechanical counter signals but it seems that KM only provides one total counter *urghs*
A hint in the right direction would really make my day
Bookmarks