Konica Bizhub C 253 C2152 Error Code

[Doug James]

Code won't clear, Took transfer belt out and it's working OK. Is their a common fix to this problem ?

[pepper38_cnd]

Try taking out the screw that holds the rear belt lock mechanism and replacing it with a screw 1/4 inch or shorter I have seen this screw come in contact with the gears (tranfer retracksion drive gears) behind the bracket if over tightened. Or if the wrong screw is put in after disassembly.

[JustManuals]

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[Synaux]

"Relevant Parts:

Fusing motor (M5)
Transfer belt retraction clutch (CL7)
Transfer belt retraction sensor (PS31)

Printer control board (PRCB)"

[Doug James]

Thanks you guys... Really appreciate your help...

[Avskrap]

The standard fix for this is, if the belt is already factory modified per the technical notices, to tear the machine to pieces and replace the sensor mentioned by Synaux. It's located behind the main drum drive assembly. Replacing this sensor has solved the problem for me, every time.

[Darren King]

Avskrap is right. This isn't a 20 minute job though, so don't be in a hurry. The modified sensor assembly is available from KonMin.
Darren

[MFPTech]

Avskrap is right. This isn't a 20 minute job though, so don't be in a hurry. The modified sensor assembly is available from KonMin.
Darren

The sensor's position can be adjusted by using a long screw driver .... it will save lots of time

[173545]

Code won't clear, Took transfer belt out and it's working OK. Is their a common fix to this problem ?

I found this helpful.

[Doug James]

I found this helpful.

Wow... I am so grateful...