Konica copier 1503 ZMR

[Don Komer]

Ihave a Konica 1503 copier which keeps showing a \"35\" fault. This fault is associated to the fixit heater temperature.
When the fixit section test is run it checks just fine.
I have checked all components on the fixit section separately and they all check that they are good. How do I clear the \"35\" fault?
Thanks
Don Komer (fixit@pixius.net)

[CMB]

throw it in the dumpster. konica has not made parts for that copier in over 5 years.
really, you are probably s.o.l. on that one if a thermostat is out