Thanks for the info, was not sure if they would break in half or not so changed out the dev unit.
I may have others that are split and not seen during PM, and this one happened to be spun to the right area to see it.
Thanks for the info, was not sure if they would break in half or not so changed out the dev unit.
I may have others that are split and not seen during PM, and this one happened to be spun to the right area to see it.
Hijacking thread (sorry)
Ds collars are really really reallllly bad design on 250/350/222/282/362. Oh man i lost 4-5 new drum( € - $ ) till i didn't learn my lection and got ds collars from hans . Dont even want to talk about pdf printing on this series ( what a disaster )
Even dam white pins get burned down and start to scratch drum.....any homecocking solution on this?
We are working on this. We developed several solutions but are still in the process of testing to find out which is the best.Even dam white pins get burned down and start to scratch drum.....any homecocking solution on this?
We solved however the problems with the little rolls from the transfer roller not turning freely but are still working to make a commercial product out of it.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
Rollers are basically the same but those collars are a bit better designed. Question please: Do you use OEM or after market toner?I rarely see rings worn into the BH350 drums anymore and there wasn't any change in copy quality.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
On the 200-350 we had a dev unit done at the 1st PM 65k. Single copies ???
So, when we would get a new 200-350 dev unit back in stock we fitted them with the DS roll kit KMBS sells to prevent premature failure.
Those developing units stayed the exact same design/makeup to this day if you order one.
Bookmarks