I have a problem on a bh 211, The machine powers on then cuts out straight away, i have changed the fuser and interlock switch. any ideas guys!!!
thanks in advance
I have a problem on a bh 211, The machine powers on then cuts out straight away, i have changed the fuser and interlock switch. any ideas guys!!!
thanks in advance
My good old diamond geezer suggested it may be DCPS so have ordered it!!!
will let you know outcome but i recon it may be this as he is an old fossil!
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
I don't need a manual!!
WTF is DCPS?? Something like PMS or CRS?My good old diamond geezer suggested it may be DCPS so have ordered it!!!
Hans
does it turn off immediately after switching on?if no,check the auto shut off time.if yes,first i will go for fuse(but u changed it) then i will check for a short in hv.try to check also the flatcable of the scanner were it twists,maybe there is a thorn and makes short,and also check for a nibbled wire from a rodent(mouse),once i had this problem and found a wire scratched by mouse which was shorting!
stupid question, but does it shut off instantly with the side door open too?
hi, something to check, is there a PF 502 fitted????, In the distant past I had a customer move a similar machine to a new office, lifted m/c off cabinet, pulled the wiring loom ,
when they reset the machine on the paper unit the broken loom shorted of the metal. lets know how you get on, thanks Mick
Thanks for all replies I am hoping to visit this mc tomorrow weather permitting! Will let you know my findings cheers!
Bookmarks