s300-ip901 wont reinstall sys sw

[RRodgers]

i am trying to reinstall system code on an ip901-s300, the system locks up on the first disk, upon putting a monitor on the fiery, it shows the ghost program runs to about 25% then ask "output A:\ghosterr.txt?" if you say yes it ask you to place a diskette in the drive "yea, a diskette", if no, it says there is an image file problem. we have reburned numerous iso's, redownloaded the iso, tried different iso programs, tried two different 901's all with the same error. has anyone seen this. tech support feels there may be a corrupt file on the ssd, jst curious if anyone has seen this, thanks

I had the same thing, IT IS A corrupt file on the ssd site. I got them to send me a copy from one of the cd's they had. I can't believe they haven't fixed that YET!!!! That was like almost 3 years ago for me.

[Coptech]

I had to re-install 1.1 and it was pretty straightfoeward. I downloaded from ssg. Seems like it is actually 2 disks? As far as the patches go, there is a composite patch that covers the important ones that really speeds the process up.

[sanimir]

I have same problem.
Anyone have ok cd images for download.
s300 ip901 v1.1
My cd iso is not ok.

Sorry for bad gtranslate

i am trying to reinstall system code on an ip901-s300, the system locks up on the first disk, upon putting a monitor on the fiery, it shows the ghost program runs to about 25% then ask "output A:\ghosterr.txt?" if you say yes it ask you to place a diskette in the drive "yea, a diskette", if no, it says there is an image file problem. we have reburned numerous iso's, redownloaded the iso, tried different iso programs, tried two different 901's all with the same error. has anyone seen this. tech support feels there may be a corrupt file on the ssd, jst curious if anyone has seen this, thanks