One left in the field and lost my service manual...Can anyone tell me the procedure and what if any simulations need to be run after replacement of the IU?? Service manual would be nice if anyone is willing to help out with that as well....
One left in the field and lost my service manual...Can anyone tell me the procedure and what if any simulations need to be run after replacement of the IU?? Service manual would be nice if anyone is willing to help out with that as well....
IU's were user replacement items on these boat anchors.
An instruction leaflet comes with the IU.
No service manual required, No adjustments required. Machine detects it as new and does what it needs to by itself.
1. Open the main door which is on the right.
2. Grab hold of the two green handles and pull out the IU.
3. Unbox new IU.
4. Insert new IU.
5. Close the main door.
The new IU will then be initalised and reset the count.
Please don't ask me for firmware or service manuals as refusal often offends.
They should of stayed with this method.
I throw the entire IU out everytime i do a drum change anyway on everything since - vacuum cleaner stays in the car & never dirty hands
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
sigh......., yes. For our fleet of rentals ideal. Just go there without toolbox and change the image unit. No fuzzing, no c2557 etc. For customer owned machines less good cause the customer gets the units over the internet and does the replacement by himself.They should of stayed with this method.
Hans
uh, oh.....
somebody is looking for trouble.....
Hans
Bookmarks