Thanks:
0
Likes:
0
Dislikes:
0
-
Re: C5501 banner printing
Mr Who is correct you can only feed ONE at a time.
If the customer requires multiple banners (printing with the Fiery) here is the way i advise it is done.
Import the job into command workstation.
Set up the properties of the job so there will be no conflicts when printing (this is important as it is vital that the job will print without having to press "detail check" and force the job to the tray.
Highlight the job, right click and duplicate
Then hightlight both jobs and duplicate again
Repeat the two procedures above until there are the same amount of jobs to match the customer requirements
Highlight all the jobs, right click and print. this will send the file one at a time.
Hope this helps
-
Re: C5501 banner printing
Hi Friends,
I have problem regarding banner printing function on Bizhub C550.
When I press Utility/Counter key on Control panel, I didn't see the number 6 (just have from 1 to 5).
As far as I know, the number 4 show Banner printing function, so How should I do to solve it?
Anyone help me. Thank you very much.
BR,
Linh Anh.
-
Senior Tech
100+ Posts
- Rep Power
- 34
Re: C5501 banner printing
Change dip settings as explained.then try using command work station.it will give you the option of duplicating the file you want to print without having to load each paper at a time
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks