Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Error Code 2804

  1. #1
    Jr Tech
    Join Date
    Mar 2011
    Location
    60185
    Posts
    36
    Rep Power
    27

    Error Code 2804

    Is there some specific reason why I am pulling a error code C-2804 quite frequently? I just replaced the HV detecting sensor maybe a month ago on the black unit and it just popped again last night? Any thoughts?

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,054
    Rep Power
    43

    Re: Error Code 2804

    Here we go AGAIN!!!!!!!! What is the MODEL you want help with???????

  3. #3
    Jr Tech
    Join Date
    Mar 2011
    Location
    60185
    Posts
    36
    Rep Power
    27

    Re: Error Code 2804

    Konica Minolta C5501. Already tried cleaning the sensor.

  4. #4
    Jr Tech
    Join Date
    Mar 2011
    Location
    60185
    Posts
    36
    Rep Power
    27

    Re: Error Code 2804

    My apologies, its a hectic morning...Konica Minolta C5501. Already tried cleaning the sensor.

  5. #5
    Senior Tech 250+ Posts Mick01's Avatar
    Join Date
    Nov 2012
    Location
    Werribee Victoria
    Posts
    362
    Rep Power
    31

    Re: Error Code 2804

    Cleaning the sensor will do no good, once they are gone they are gone.
    To confirm if the sensor is faulty or another component try swapping the suspect sensor around with another sensor inside the machine (i.e Black with Cyan). If the sensor is faulty the code should shift. Ensure you swap both the sensor and the board.
    These sensors are very delicate and do not like being bumped around too much.
    Hope this helps

  6. #6
    Service Manager 5,000+ Posts
    Error Code 2804


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: Error Code 2804

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  7. #7
    Jr Tech
    Join Date
    Mar 2011
    Location
    60185
    Posts
    36
    Rep Power
    27

    Re: Error Code 2804

    I swopped the sensors and board and the code stayed 2804. It was suggested to check the transfer belt rollers that one of them may have come out of position. I took off the belt and all the rollers are in proper position. It won't let me get through an Auto Gamma and it pops the 2804 code

  8. #8
    Senior Tech 250+ Posts Mick01's Avatar
    Join Date
    Nov 2012
    Location
    Werribee Victoria
    Posts
    362
    Rep Power
    31

    Re: Error Code 2804

    Hi,
    My apologies, i did not look up the code before advising. C-2804 is not related to the drum potential sensor, it is a gamma correction error for black.
    Try the following:
    Print out internal test patterns 81 is a good one with all colours set to 255. 53 also with black set to about 150 and all other colours at 0.
    Have a look at the print outs and see if you have an issue with the black channel.
    You have already had a look at the transfer belt unit. I suggest you could have an issue with either the black dev unit, black drum unit, black charging unit, colour registration ass'ly.
    One thing to try is a recall standard data on the process adjustment.
    Hope this helps.

  9. #9
    Jr Tech
    Join Date
    Mar 2011
    Location
    60185
    Posts
    36
    Rep Power
    27

    Re: Error Code 2804

    Attached is the 2 print outs. As you can see black does not look good. I swopped the black drum and corona with cyan and the code remained the same 2804.

    Image0001.jpgImage0002.jpg

  10. #10
    Senior Tech 100+ Posts
    Join Date
    May 2011
    Posts
    130
    Rep Power
    28

    Re: Error Code 2804

    I had this problem recently 2 times, one time a toner refresh solved the problem, the other time was the HV1 giving the problems...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here