konica 8020 boot problem

[feryan]

Hello everyone,

I have a new konica 8020 and after I changed the cyan unit I encountered a problem.

When I'm starting it the fiery x3e start booting after that I have a menu with diagnostics/ continue booting/ etc.
If I run diagnostics everithing is ok at the end I get Passed but if I continue booting It displays a message "booting system please wait..." and I'm still waiting :P is booting fo days so th fiery never starts.
The scaner works but with problems I have cyan thic lines all over the page.

any suggestions,

thank you

[RockETop]

Looks like you might need a new HDD.

[feryan]

	Quote:			Originally Posted by RockETop
	Looks like you might need a new HDD.

It new and the red and gree led are litened Plus the fact that the tests are ok hdd wr or rtwr or whatever test it performs.

[RockETop]

	Quote:			Originally Posted by feryan
	It new and the red and gree led are litened Plus the fact that the tests are ok hdd wr or rtwr or whatever test it performs.

Have you tried to reload the system code?

[feryan]

	Quote:			Originally Posted by RockETop
	Have you tried to reload the system code?

I imagine has something to do with a cable connected to a computer that loads the SO into the firy, the problem is the only connection available is LAN and some sort of serial that I have the port but I don't have the cable.

The bad news is that the person who sold me the printer is no longer in business, and I can't use him for service. So I need someone else to help me with the problem. Looks like is nothing I can do about.