does anyone kow where i can get a printer relay bd 1 for a 7075, (part of vi601 interface kit for ip601m) mine has an error "failure to get node info from eui" when i connect a onitor to the ip601m, ive replaced printer relay bd 2 as recommended by konica, but the rinter relay bd. 1 is $800 from konica, someone out there has to have one on an old 7075 that they can sell cheap, please!!!!!! part # 13jq-7310.. also, has anyone seen this problem on the 7075 with ip601, is there anything else i can try, or any repair facilities. (hytec wont touch it) it was working, we moved the machine to the demo floor and i noticed a few days later the printer was never initiallizing. when i hooked up a monitor to the 601, i saw he error. all solutions recomends the relay bd 2 and then 1, ive tried 2, but dont have a one, and cant afford a new one. it does appear that several icps may be blown on the relay bd 1. help please..............we are small, and starting out a print shop as well, its a bad time to loose a high speed printer.
email:
ctowncopy@gmail.com
Linear Mode
