Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Conservative in Exile 250+ Posts laserman06's Avatar
    Join Date
    Dec 2007
    Location
    Hebron, KY
    Posts
    323
    Rep Power
    37

    Angry 8031 jamming from LCT

    I have a 8031 that has intermittant jamming from LCT. I just took this machine over from another tech. This problem has been going on for awhile. Machine will run fine for awhile. Then start jamming out of LCT.

    First time I went out I cleaned all of the paper feed rollers and one ways. Thought that I had it fixed. Problem came back. We replaced the whole LCT. Convinced customer to get better paper. Ran perfect for about 2 weeks. Now the problem is back.

    Any suggestions.
    The family that prays together, stays together!
    Smile God created you and He doesn't make mistakes!

    Relax, God IS in control!

    Be still and know that I am God
    Ps 46:10

  2. #2
    random
    Guest
    Did you replace the unit with a new one or a used one? If not I can almost guarantee the feed tires. People see those types of tires and think they never need replacing when they do.

  3. #3
    Village Idiot 500+ Posts wagon's Avatar
    Join Date
    Dec 2006
    Location
    Toowoomba
    Posts
    654
    Rep Power
    42
    You need to change ALL of the tyres in the lct - feed, sep & both sets of pickup tyres. Clean all of the one-way races and buff the shine off the shafts. Clean the paper dust from the sensors, too. These should be pretty reliable provided a few parts are kept up to scratch. Oh, and clean the vertical transport rollers too - you maybe getting a timing jam.
    If you are hitting your head up against a wall it always feels better when you stop.

  4. #4
    random
    Guest
    Yes, some good point's here. Also is the machine jamming when using the LCT or jamming in general? From memory the machine will always default to the LCT when printing so what could be perceived as a LCT jam could be an engine jam. The fuser exit sensor is particularly bad for being intermittent.

  5. #5
    Conservative in Exile 250+ Posts laserman06's Avatar
    Join Date
    Dec 2007
    Location
    Hebron, KY
    Posts
    323
    Rep Power
    37
    It is the LCT jamming. I do have all the rollers on order. Will let you all know the outcome.
    The family that prays together, stays together!
    Smile God created you and He doesn't make mistakes!

    Relax, God IS in control!

    Be still and know that I am God
    Ps 46:10

  6. #6
    Conservative in Exile 250+ Posts laserman06's Avatar
    Join Date
    Dec 2007
    Location
    Hebron, KY
    Posts
    323
    Rep Power
    37

    Thumbs up

    Well, I replaced all the rollers, even the ones I was told were good. But knowing they use the same time of rollers on kyocera, I replaced them too.

    That was on Monday. It is now almost Friday. Customer has not called back in. Thanks to all for confirming my ideas.
    The family that prays together, stays together!
    Smile God created you and He doesn't make mistakes!

    Relax, God IS in control!

    Be still and know that I am God
    Ps 46:10

  7. #7
    Village Idiot 500+ Posts wagon's Avatar
    Join Date
    Dec 2006
    Location
    Toowoomba
    Posts
    654
    Rep Power
    42
    As Elvis liked to say.. Thank you very much.
    If you are hitting your head up against a wall it always feels better when you stop.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here