Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 27
front and back registration
hi guys,
has anyone encountered this problem: front and back registration is not good. The shift of the cutting marks on the back side is almost 3mm when running. I can exactly shoot the 2 corners, upper left and lower right, but the two sides does not fall correctly. This problem occurs for large paper sizes especially SRA3.
I have replaced already the registration unit but not good.
Anyone encountered this problem?
Thanks,
Marlon
-
Re: front and back registration
My crystal ball went out for an oil change. What's the machine type?
Hans
-
Technician
- Rep Power
- 27
Re: front and back registration
The model is bizhub 1051... Sorry I didn't mention it in my post a while ago
-
Re: front and back registration
adjust your zoom and loop...
may be getting some shifting.
Does this happen from all trays or just PF?
-
Technician
- Rep Power
- 27
Re: front and back registration
The paper comes from tray1&2 only, no PF.
I can shoot the registration on the first page but when I run multiple pages, there is a shift of about 2mm
There is also a skew in the upper portion of the paper
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks