Great solution, thanks for sharing.
Only question remains: Why did the ICP blow?
Hans
Great solution, thanks for sharing.
Only question remains: Why did the ICP blow?
Hans
Hey i found this thread thankfully. i went up there and long story short i ended up having to change out icp5 on the print control board. Amazing! i don't know how you guys figured it out but it worked. It would always do a developer background at power up on the first page first few inches only. It would work great the rest of the day(unless you powered off the machine) until the next power up. It was driving me and them crazy but it is all better and life is good!!!
Thank you again!
Derrick
Bookmarks