Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Junior Member
    Join Date
    Jun 2013
    Posts
    5
    Rep Power
    0

    Remove Finisher FS608 from Konica Minolta bizhub c550?

    Greetings, thank you in advance for any help...

    Finisher fell over in a move and broke output trays and bent the long metal roller shaft at mouth exit of upper tray... I disconnect the finisher from bizhub c550 and power on to use without the finisher but the screen gives me error saying: "The part indicated by (black arrow) is open, please be sure that it is properly closed." The arrow points to nothing and I can't go to administration or service mode with the error up...

    I have another good FS608 finisher in another part of the building so I wheel it over and connect it and this bizhub c550 is happy again but the other c550 no happy...


    How do I run this thing without the finisher? I can get into administration and/or service mode but I see no settings to enable/disable finisher... are there jumper settings I am overlooking or something? Do I need a paper route re-direction part?

    Thanks again,

    David.


  2. #2
    Senior Tech 250+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    483
    Rep Power
    23

    Re: Remove Finisher FS608 from Konica Minolta bizhub c550?

    Is there a bridge unit (conveyance) between the main body exit and the entry to the finisher? If so remove it and you should be OK


  3. #3
    Junior Member
    Join Date
    Jun 2013
    Posts
    5
    Rep Power
    0

    Re: Remove Finisher FS608 from Konica Minolta bizhub c550?

    Thanks, unplugged the bridge unit and slid it out... now the machine can function/print to the open cavity (exposed sheet-metal) where the conveyance was but oddly enough finisher settings still show in the LCD menus... (amputee limb sensation... . is there a cosmetic plastic cover/part number I need to buy so the prints will stack nicely as they come out of the c550 and is there anywhere in the menus or admin or service mode where I need to disable the finisher option?

    Thousand Thanks!


  4. #4
    Senior Tech 250+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    483
    Rep Power
    23

    Re: Remove Finisher FS608 from Konica Minolta bizhub c550?

    There is normally a cover there for the paper to exit onto. I dont know if its available as a spare. Also you will still have a finisher button because you can select offsett (criss cross) sort without a finisher.

    Last edited by tech51; 06-14-2013 at 08:40 PM. Reason: extra info

  5. #5
    Junior Member
    Join Date
    Jun 2013
    Posts
    5
    Rep Power
    0

    Re: Remove Finisher FS608 from Konica Minolta bizhub c550?

    You can in fact get them as a spare for those of you who find yourselves in my situation needing to cover the cavity... google is my/our friend... you have been very helpful tech51!


  6. #6
    Senior Tech 250+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    483
    Rep Power
    23

    Re: Remove Finisher FS608 from Konica Minolta bizhub c550?

    Quote Originally Posted by Deepspace View Post
    You can in fact get them as a spare for those of you who find yourselves in my situation needing to cover the cavity... google is my/our friend... you have been very helpful tech51!
    My pleasure..


  7. #7
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    1,865
    Rep Power
    48

    Re: Remove Finisher FS608 from Konica Minolta bizhub c550?

    i do believe the output tray was an optional accessory that also included the output cooling fan module.

    regarding the fan module, The machine doesn't know if its there or not or care, and ive never noticed what difference it makes on decent, domestically sourced paper.

    If at first you don't succeed, try the way I told you how to do it in the first place.

  8. #8
    Service Manager 10,000+ Posts
    Remove Finisher FS608 from Konica Minolta bizhub c550?

    JustManuals's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    10,041
    Rep Power
    140

    Lightbulb Re: Remove Finisher FS608 from Konica Minolta bizhub c550?

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •