Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Dec 2010
    Posts
    83
    Rep Power
    14

    Bizhub Pro951/FS-532 finisher

    Just curios if anybody is having stapling issues with FS-532 finisher connected to a bizhub 951.I have had to replace motor M5 and belt in stacker unit.I am know having stapling jams again.Ordered finisher main board.


  2. #2
    Senior Tech 100+ Posts MVPunisher's Avatar
    Join Date
    May 2013
    Location
    hudson falls
    Posts
    142
    Rep Power
    10

    Re: Bizhub Pro951/FS-532 finisher

    Any luck with this??? I have 3 machines in field and intermittently get staple jams on all 3, mostly 7224 and 7220. The few times I saw it it seemed like the belt timing was out of whack. Get a few more jams within a short period then it corrects itself for a bit....

    You can adjust the gear position in reference to the belt position but see nothing that tells us the correct position...


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •