Results 1 to 10 of 10
  1. #1
    Technician
    Join Date
    May 2009
    Location
    Durban
    Posts
    29
    Rep Power
    31

    Bizhub C35 error 0094

    Hi we have a C35 that randomly gives the error 0094, We have done the mod to the spring and cover as well as checking the burr on the cover, we have changed the sensor as well as a new transfer belt. We removed the foam on the solenoid to make sure it isn't sticking. I have checked the timings on the gears for the transfer section and it is right yet the code still comes up randomly. Any assistance would be appreciated.

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Sep 2012
    Posts
    1,129
    Rep Power
    39
    Replace the right door assembly. Its a common issue. There is a bulletin somewhere about it. Sorry I wish I could remember the part number. I would log a support ticket if you can. They will be able to give you the part number

    Other than that it could be the transfer belt but it is about 1 in 10 chance of that happening which is what a guy at KM support told me. But you already changed that.


    EDIT: I tried to find the document for you but couldn't. It seems before the only way I found out about the right door assy replacment was when I called KMBS. They asked me to look on the back of the machine to see if other fixes were done. There was a green sticker on the two machines I had this happen to. Since I had the green sticker they recommended the right door assy. They gave me the part number and the document number which gives full instructions to the replacment. It is a pain though because you have to disassemble quite a bit. The right door assy has a long yellow harness that you have to route through the machine all the way to the other side to the control board. I remember having to remove the adf, scanner unit, control panel, HVPS, hard drive and other things. But it fixed the issue in both of my cases.

    Sent from my Galaxy Nexus using Tapatalk 2
    Last edited by wseyller; 07-01-2013 at 06:11 PM.

  3. #3
    Service Manager 1,000+ Posts
    Join Date
    Sep 2012
    Posts
    1,129
    Rep Power
    39
    I found part # if you need it.

    A121R70222

    It is actually called a VERTICAL CONVEYANCE ASSY/ C35

    Sent from my Galaxy Nexus using Tapatalk 2

  4. #4
    Technician
    Join Date
    May 2009
    Location
    Durban
    Posts
    29
    Rep Power
    31

    Re: Bizhub C35 error 0094

    Thanks will look into that.

  5. #5
    Technician
    Join Date
    May 2010
    Location
    east london
    Posts
    14
    Rep Power
    29

    Re: Bizhub C35 error 0094

    Good Day
    Replace the registration clutch CL3

  6. #6
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    2,141
    Rep Power
    75

    Re: Bizhub C35 error 0094

    Hopefully after 2 years the machine is not still down.

  7. #7
    Technician
    Join Date
    May 2010
    Location
    east london
    Posts
    14
    Rep Power
    29

    Re: Bizhub C35 error 0094

    Yes lets hope that is not the case....

  8. #8
    Technician Skyler's Avatar
    Join Date
    Jan 2014
    Location
    Spokane Wa.
    Posts
    15
    Rep Power
    21

    Re: Bizhub C35 error 0094

    Remove the Cyan and Magenta charge pressure springs front and rear on the transfer assembly.

    Good Luck

  9. #9
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    2,141
    Rep Power
    75

    Re: Bizhub C35 error 0094

    Quote Originally Posted by Skyler View Post
    Remove the Cyan and Magenta charge pressure springs front and rear on the transfer assembly.

    Good Luck
    surely you are talking about extending the life of 0096 error machines.

    0094 is refering to second transfer roller retraction failure or the non operation of the IDC sensor window, which is its only method of knowing there was success in the operation.

  10. #10
    Technician Skyler's Avatar
    Join Date
    Jan 2014
    Location
    Spokane Wa.
    Posts
    15
    Rep Power
    21

    Re: Bizhub C35 error 0094

    Quote Originally Posted by Skyler View Post
    Remove the Cyan and Magenta charge pressure springs front and rear on the transfer assembly.

    Good Luck
    Quote Originally Posted by EarthKmTech View Post
    surely you are talking about extending the life of 0096 error machines.

    0094 is refering to second transfer roller retraction failure or the non operation of the IDC sensor window, which is its only method of knowing there was success in the operation.

    Jumping Jelly Beans Batman!!! What happened to everything I wrote??? Lets try this again!!

    Your right earthkmtech about the 0096 but helps with 0094. I changed it to say Remove the Cyan and Magenta charge pressure springs front and rear when replacing the transfer ass'y. We have allot of C35's here and since we started modding all belt assembly's the machines run allot better.

    Error code 0094. The following error message may be indicated soon after replacing the Transfer Belt Unit.

    First image transfer pressure/retraction failure. The IDC sensor does not reach the condition where the level detection is available.
    Power printer OFF/ON. If error persists, remove the Transfer Belt Unit, manually rotate it one turn then reinstall it. The Transfer Belt Unit may need to be
    replaced if the error continues (p/n A148 0Y1).

    When the Transfer Belt Unit is replaced, the black plastic guide is moved to the downwards position. If the door
    is forced closed, the machine will indicate a 0094 error message.
    Move that black piece upwards after replacing the Transfer Belt Unit. If the side door (Vertical Conveyance assembly) becomes damaged after being forced
    closed, replace it (p/n A121 R702 22).

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here