Morning chaps have a Konica Minolta c654 bringing jam code 7219 ? anyone seen this before ?
thanks
Kenny
Morning chaps have a Konica Minolta c654 bringing jam code 7219 ? anyone seen this before ?
thanks
Kenny
Jam codes beginning with 72xx is a FS jam code. What FS is mounted on the machine? What are the symptoms? Paperweight? Folding?
Check the bypass switching gate solenoid in the finisher it might be dead or have a broken spring. We also had one have a board failure causing intermittent jamming but I don't recall if it was a 72-19, good luck
Replace SD2 (p/n A11PR70211).
presuming its FS-535, if yes, it is the bypass gate solenoid spring broken. VERY common on this and FS-526.
Done it MANY times now.
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Thanks man, i try it tomorrow.
See you
Is it a FS-534? Maybe this will help:
FS-534 alignment plate wearing.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks