Hi all,
Anyone have encounter patchy on print out where i change all the consumable which as 4 new starter,4 new drum ,4 new charger unit,new 2nd transfer unit,new 1st transfer belt,but still can't help,any suggestion???
Thanks,
Hi all,
Anyone have encounter patchy on print out where i change all the consumable which as 4 new starter,4 new drum ,4 new charger unit,new 2nd transfer unit,new 1st transfer belt,but still can't help,any suggestion???
Thanks,
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Reset counters and ran adjustment
Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
After i change the consumable,i already done up the counter reset and run adjustment but the patchy stil there.
Any other suggestion.Thanks
Fusing unit i also chg up a new 1,but stil can't solve the prb.the pathcy come out once the customer use somthg like matt paper 260gsm
Please check black mylar Guide at Main transfer roller, or remove the mylar guide if bent or tear.
Hi Perdana,
can show me the picture of mylar u mention or itz at 1st tranfer section,or developer section?thxs
is it possible to scan image and post it on thread - try test copies from another tray or on normal paper and in test mode -could help with diagnosing fault
Hey what ya doing? - just screwing around.
Bookmarks