Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2012
    Rep Power

    bizhub pro c500 adjustment help

    Hi mates,
    I just finished replacing U/L fixing roller on bizhub pro c500, been trying to follow the manual on mode 36, output image pattern test, but don't understand of entering the numeric key.
    how do you Guys calibrate the image or where to get procedure step by step.


  2. #2
    Senior Tech 250+ Posts Mick01's Avatar
    Join Date
    Nov 2012
    Werribee Victoria
    Rep Power

    Re: bizhub pro c500 adjustment help

    Can you please explain what you are trying to achieve by outputting test patterns? You have replaced upper and lower fixing rollers, the only adjustment is fusing speed adjustment which is outlined in the service manual.
    FYI I use test pattern 1. You have to set the density of the colour you want to check in test pattern density setting.
    So for example if i want to check half tone of magenta in test pattern density setting i set Magenta density to 125, YCK to 0. then in test pattern output mode i set pattern number 1. This will output a sheet with Magenta at 125 density

    Hope this helps

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts