Thanks:
0
Likes:
0
Dislikes:
0
-
BizHub 250 locked up
Machine starts to warm up but freezes with the Kon/Min logo on display. I seem to recall this has to do with the NVRAM? Also heard of a special program / firmware that can reset the NVRAM?
Any ideas appreciated. Thanks
-
Re: BizHub 250 locked up
There is a special procedure to do something similiar when getting some error codes related to an nvram issue but if it won't go past the logo then an nvram problem would mean replacement of nvram and mfp board.
-
Re: BizHub 250 locked up
Try reseating first the MFBS board (under the scanner, the one with the network interface on it). This helped me in many cases.
Hans
-
Re: BizHub 250 locked up
I have the Ricoh NVRAM reset program, email me if you want it.
Paul@justmanuals.com
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks