Please how do I use the downloaded firmware on my C550. I don't see any USB port on the system
Did you get the firmware to work? Is this the software that you use to reformat the harddrive? I have been locked out of my machine with a CE Password (no one knows what it is). I need to figure out how to reset the machine to factory settings? is this was you use to do that -...the firmware?
If so what is the process? I have downloaded the firmware tool, but I see no instructions? SOmething about a compact flash? where does this compact flash go? how do you reset the machine.
Help - ronaldbrilliant@yahoo.com if you can help.
I have to rewrite firmware for c550. I have the toolkit and a CF card (2 gig). I must be missing something. When I try to create the card with the toolkit it looks like everything is fine, but when I plug it into the machine it says that there is an error.
Questions
1. DO you have COMPLETE instructions on how to format the CF card?
2. Does the CF Card have to be 128 meg (or is that just what was available years ago?)
3. Any and all advice and details on how to do this reformatting would be greatly appreciated.
What firmware version have you written to the card? This is the latest version details.
Latest Mass Production Firmware for the C550 Model
1. Release version and download file name
The newly released program version and download file name are as follows.
[Release version]
<C550 MFP controller firmware>
Model Program Name Current Ver. New Ver. Program File Name Checksum Note bizhub C550 MFP firmware GPY-R6 GB1-R6 A00J0Y0-F000-GB1-R6.exe CDBD
[Download file name]
A00J0Y0-F000-GB1-R6.exe
C550_PRI_DLBT1300320EN.doc
2. What changed
Release of bizhub C550 (Special Program - Card Ver.GB1-R6 i-option2)
The individual files in the card and the checksum are as follows.
2.1. Revision of individual version Program nameFile nameChecksumNote
BOOT:A00J0Y0-1E00-G00-05874C
MFP controller subset:A00J0Y0-1F00-G00-7020E8
MFP controller:A00J0Y0-0100-GB1-R64C2B
MFP controller system: A00J0Y0-1000-GB1-R6----
MFP controller print controller: A00J0Y0-3000-G00-JD----
MFP controller print controller font: A00J0Y0-3F00-G00-44----
MFP controller print controller Demo Page: A00J0Y0-3E00-G00-00----
MFP controller MIO: A00J0Y0-5000-G00-00----
MFP controller PSWC: A00J0Y0-5100-G00-10----
MFP controller MIB IF: A00J0Y0-5200-G00-J2----
MFP controller IPP IF: A00J0Y0-5300-G00-82----
MFP controller OutSide controller IF: A00J0Y0-6100-G00-80----For Fiery
MFP controller TCP/Socket: A00J0Y0-6300-G00-J4----
MFP controller OPEN API: A00J0Y0-7000-G00-12----
MFP controller operation panel: A00J0Y0-8000-GPW-R6----
MFP controller PIC: A00J0Y0-8200-GC7-23----
MFP controller CSRC control Body: A00J0Y0-8300-G00-80----
Scanner: A00J0Y0-0023-G00-36364B
Printer: A00J0Y0-0050-GCA-22DA27
Panel CPUA00J0Y0-8900-G00-02----
FAX board controller: 15LA-0040-G02-13-000F105
Operation panel message data: A00J0Y0-8100-GFV-R6902B
ADF: A01H0Y0-0024-GC0-124C4D
Finisher (FS-517)A07R0Y0-00N1-GC2-227767
Finisher (FS-518)A07P0Y0-00N1-GC2-03AE5E
Finisher (FS-608)A07U0Y0-00N1-GC2-227767
RUA07X0Y0-00R1-G00-1131AC
ZUA07T0Y0-00H1-G00-02E8D4
(Copy Protect)----14C6
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
I have to reset the C550 CE Password. No one knows what it is. I have the Took Kit. I have followed the Service Manual page 80-87 approximately. Bought brand new unformatted 128 meg Sandisk CF Card. But still i get a cryptic response when I put the CF card in and then start the main and sub switches. It says. "This is invalid Card." " Make sure the Card". That is all it says. I do not know how it could be invalid when I followed every single step. I have tried a couple times, each time starting over from the beginning from formatting the card using the Tool Kit (not windows). I have verified the version number of the alleged software. Not sure what else. Hope you can help.
1st does the imaging toolkit successfully write the firmware to your CF with out any errors?
2nd what slot in the machine are you putting the CF card?
3rd if all the above works format the CF card in Windows, set file allocation to default then format & try again.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks