Konica 8020 problem P8, P21

[stsioris]

Hi, I am a new member of your forum. I have a konica 8020 and a problem too.
When machine finish the warminp up mode at the start up an alert apears (near trouble P8, P21). Is that a major problem?
In addition when i print a ps test page the yellow color has mooved 2-3cm from other colors. The cyan magenta and black is printed ok (the one above the other).
How may i fix these problems?
Please if anyone has answers about that let me know.

[erikijssel]

Hello,

I think you have a problem with your LPH one of the pins is bend

[stsioris]

	Quote:			Originally Posted by erikijssel
	Hello, I think you have a problem with your LPH one of the pins is bend

Thank a lot you for your answer. I hope repear my Konica 8020 and troubles stop.

[mitchl]

The P-8 code is a yellow IU failure and the P-21 is a color test pattern failure which is caused by a transfer belt anomaly.............. I suppose the first question is, are you a technician? If not its time to call your local service entity as these problems will be a bit over your head.

[gateway.vly@gmail.com]

konica BIZ HUB C250 and a problem too.
When machine finish the warminp up mode at the start up an alert apears
AN ERROR MESSAGE IS (MACHINE STATUS
P6,P7,P8,P9, P21). Is that a major problem?
How may i fix these problems?
Please if anyone has answers about that let me know.[/quote]

[mitchl]

	Quote:			Originally Posted by gateway.vly@gmail.com
	konica BIZ HUB C250 and a problem too. When machine finish the warminp up mode at the start up an alert apears AN ERROR MESSAGE IS (MACHINE STATUS P6,P7,P8,P9, P21). Is that a major problem? How may i fix these problems? Please if anyone has answers about that let me know.

[/quote]
If indeed you are NOT a technician, the chances of you fixing the machine are slim to none! What the machine is telling you is that all the IU's have failed (low density or possibly high density but doubtful) you may want to dial up you local service people!

[stsioris]

	Quote:			Originally Posted by mitchl
	The P-8 code is a yellow IU failure and the P-21 is a color test pattern failure which is caused by a transfer belt anomaly.............. I suppose the first question is, are you a technician? If not its time to call your local service entity as these problems will be a bit over your head.

I am not a technician. I just want to locate the failure. Thanks a lot

[mitchl]

	Quote:			Originally Posted by stsioris
	I am not a technician. I just want to locate the failure. Thanks a lot

No problemo!

[gateway.vly@gmail.com]

yes i am technician tell want can i do for this prob
i hope is it low density
If indeed you are NOT a technician, the chances of you fixing the machine are slim to none! What the machine is telling you is that all the IU's have failed (low density or possibly high density but doubtful) you may want to dial up you local service people![/quote]

[manuals4you]

'the chances of you fixing the machine are slim to none!'

And Slim left town.

Paul@justmanuals.com