Need SMB Scanning Setup for Mac Server on a Konica C450

**Simons** · 08-20-2013

Not very familier with these and Mac even less. Does anyone here have the info? I can paypal you tips too. Need help with this.

**EarthKmTech** · 08-20-2013

if its 10.7 or newer forget about it, its not an option at all with the c450 it will never work, period. research enabling the ftp server functionality on the mac and use that method.

**ruben** · 08-20-2013

Originally Posted by EarthKmTech

if its 10.7 or newer forget about it, its not an option at all with the c450 it will never work, period. research enabling the ftp server functionality on the mac and use that method.

What about just re-enabling the old SMB protocols?

See: http://www.copytechnet.com/forums/ri...tml#post322532 and http://www.copytechnet.com/forums/ky...tml#post332905

**EarthKmTech** · 08-21-2013

for us personally we don't go installing unknown software or make large changes to customers computers, sure there may be a way of getting it to work like it used to. For me and my companies safety the answer is no, and you must upgrade (its more money in my pocket anyway)

unrelated, but, recently I had a customer running 10.8 and it was working perfectly scanning to smb off a C203 with the special firmware to do so. Some mysterious update was performed on the computer unknown to me and it ceased working ever again. I had to change over to ftp.

**Simons** · 08-21-2013

Im with you, I am not installing third party software or messing with customers computers. I understand the upgrade reasons. I suspect that is why.

I think they are more intrested in SMB scanning then using the FTP
Thanks!