Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    CarlArmitage
    Guest

    Failed to Complete Job

    Hi guys, having trouble with a C280 and SMB scanning. everything has been working fine up until yesterday when their server went down. check all the settings on the copier and on the folders themselves and everything seem right? any one experienced this and fixed it?

  2. #2
    Service Manager 1,000+ Posts
    Failed to Complete Job


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: Failed to Complete Job

    Quote Originally Posted by CarlArmitage View Post
    Hi guys, having trouble with a C280 and SMB scanning. everything has been working fine up until yesterday when their server went down. check all the settings on the copier and on the folders themselves and everything seem right? any one experienced this and fixed it?
    your questions is pretty vague. what does the error tell you in the job history? will at least point us in the right direction to assist you further

  3. #3
    CarlArmitage
    Guest

    Re: Failed to Complete Job

    Quote Originally Posted by rrrohan View Post
    your questions is pretty vague. what does the error tell you in the job history? will at least point us in the right direction to assist you further
    it just says deleted due to error

  4. #4
    Service Manager 1,000+ Posts
    Failed to Complete Job


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: Failed to Complete Job

    Quote Originally Posted by CarlArmitage View Post
    it just says deleted due to error
    just checking how well do you know KM copiers?

    Could of sworn if you open job details in the history it gives more info than that

    id be confirming it can ping the server. if your using host name try pinging from copier using that, or if your using IP address use that.

  5. #5
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96

    Re: Failed to Complete Job

    Assuming you are correct and nothing has changed on the MFP side, it's going to be 1 of three things

    1. Server connect error. The MFP cannot connect to the host machine. This could be due to the host name, or IP address has changed.
    2. Log in failure. The MFP can see the target folder, but either the username/password has changed, or the permissions for that account no longer allow access to the folder
    3. No Specified folder. The MFP can connect to the host, credentials are correct, but the target folder has been moved, or deleted.

    If I was doing the call and the problem was one of these items, I would be billing for my time to correct it. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

  6. #6
    Service Manager 5,000+ Posts
    Failed to Complete Job


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: Failed to Complete Job

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads



    Paul@justmanuals.com

  7. #7
    Super Tech 500+ Posts CompyTech's Avatar
    Join Date
    Feb 2011
    Location
    MS
    Posts
    706
    Rep Power
    36

    Re: Failed to Complete Job

    Quote Originally Posted by emujo View Post
    Assuming you are correct and nothing has changed on the MFP side, it's going to be 1 of three things

    1. Server connect error. The MFP cannot connect to the host machine. This could be due to the host name, or IP address has changed.
    2. Log in failure. The MFP can see the target folder, but either the username/password has changed, or the permissions for that account no longer allow access to the folder
    3. No Specified folder. The MFP can connect to the host, credentials are correct, but the target folder has been moved, or deleted.

    If I was doing the call and the problem was one of these items, I would be billing for my time to correct it. Emujo
    This.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here