I have a Kinica Minolta Bizhub C253 I'm doing magenta sky shots to see the density of the magenta imaging unit. I'm getting a lot of white spots in the prints any reason to the cause?
Thanks: 0
Likes: 0
Dislikes: 0
I have a Kinica Minolta Bizhub C253 I'm doing magenta sky shots to see the density of the magenta imaging unit. I'm getting a lot of white spots in the prints any reason to the cause?
How is the state of the Mg IU?the chis is reseted?
Check the electric contatcts of the unit,test with another one if you have the posibility.
Could you post a scan of magenta pattern?
Originally Posted by Blizzoo
I see if I can figure out how to post with a scan lol I'm new at this!
Type your post and scroll down to Attachments (under Additional Options), Click manage attachments. U can figure out the rest from there.
Why are you doing skyshots to check density? Why not use service mode to do it?
Same thing I was thinking. In service mode go to test mode then halftones.
Sent from my Galaxy Nexus using Tapatalk 2
Agree, half tones say much more about the quality of components.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
I did sky shot because I had a bit of trouble remembering to do half tones. I would agree it will give a better result.
Reply With Quote
Bookmarks