Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Bizhub c250

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jul 2012
    Location
    bucuresti
    Posts
    54
    Rep Power
    0

    Bizhub c250

    Km bizhub c250 transfer belt at it's life end, anyway, the transfer belt works just fine. I need to know if there's a chip or a way to reset it.
    Thanks!

  2. #2
    Head Tech 500+ Posts SmellsHot's Avatar
    Join Date
    Dec 2009
    Location
    Sault Ste Marie, MI
    Posts
    512
    Rep Power
    35

    Re: Bizhub c250

    Theres a fuse. Should be located on the left handle as you pull the tbelt out. Look for the contacts. two screws, e-clip and one tiny screw will remove the cover to the fuse....
    Everyone has the right to be stupid. Some people just abuse this privelage more than others

  3. #3
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    96

    Re: Bizhub c250

    FYI you must use the exact same fuse as original, if you don't you will blow PCRB and will need to be replaced. Might be prudent to just swap the x-fer belt with new one if you are not sure of what you are doing. Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here