Book says C-D0EF (that is a ZERO or ZED not a letter "O")
IF YOU WANT HELP GET YOUR CODES RIGHT or supply pictures....
ERROR MEANS....
Hard disk/K (HDD/K), /C (HDD/
C), /M (HDD/M), /Y (HDD/Y) disconnected.
Otherwise, either
broken or during initialization.
then...
Are you sure Hard Drives are installed? if not check...
If they are not installed or someone pulled them to sell on EBAY....
Set DipSW 2, Bit 0 to 0 - this will disable Hard drives and allow machine to work...
I would check for a loose wire check for a bad connector, lots of small wires on that board and it can come loose during transport or just use (vibration).
We now offer remote support message me for info....
Bookmarks