How are you all
The problem is that the paper stop in the ADF
NO 23 is stop paper
help me ,,,,,
thank for all
Thanks: 0
Likes: 0
Dislikes: 0
How are you all
The problem is that the paper stop in the ADF
NO 23 is stop paper
help me ,,,,,
thank for all
Lovely photos. It would be really helpful if you were to print off the Management List, than look at the jam codes listed. Don't know how? Consult your manual. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
This series of doc feeders have a angle-shaped sensor on the top cover.
Hard to see at first but it always gets covered in paper dust.
It's always fixed it for me.
There are really no one-ways on this model and the rollers last a long time
Need jam codes from jam history in service mode or from a printed list output (management list). Does the leading edge of the paper stop in the same place every time or does it vary. Is the paper damaged at all?
Honestly the pictures you give are no help. You just took pictures of the doc feeder nothing that helps us.
Sent from my Galaxy Nexus using Tapatalk 2
Re: bh_283 paper jamp in the fedar
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
clean optic sensor at 24Originally Posted by abbas saeed
How are you all
The problem is that the paper stop in the ADF
NO 23 is stop paper
help me ,,,,,
thank for all
Reply With Quote
Bookmarks